Yuni Industrial Professional Duty Air Impact Tool YU3600 complete in case
Yuni Industrial Professional Duty Air Impact Tool YU3600 Safety Regulations/Operation instruction This Brand Pneumatic Spanner is made of wear-resistant and shockproof materials under excellent design and strict quality control. Notes to the users before operating: 1. Before each shift, lubricate the tool with3-Sdrops of engine oil through air inlet. Don't add the oil with big viscosity, and keep the tool unning idly for1-2seconds.
Otherwise it will reduce the force of air motor! Keep dry and clean of air cylinder and gas container, and be sure that the air supply tube shall not be air leakage. Check to see if the air gauge is at 10KG before use it, safety standard level within 6-8KG of working pressure.
In order to keep normal operation of this unit, be sure to fill in the air and water from air outlet of air cylinder, filter, and auto oil filler combination. If no oil filter, please fill oil in according to the assigned oil port. Fill oil in before working to keep the best performance function of this unit.
Please use of recommended oil or spindle oil for pneumatic spanner. If this unit keeps still without running or suns not smoothly, please use of large capacity of special recommended oil or spindle oil to fill in for pneumatic spanner turning.
Remove and clean away the dirts and obstacles. If they are unable to be removed after continuous twice or three times, please send them to the dealer for repair or maintenance. In order to protect the tools and extend service life we advise that 3-point combination and air-drying machine should be fixed in pipeline of air compressors.
Clean those tools which haven't been used for over half a year and seal them properly with oil. Please put on safety protective glasses when operate.
